375 Bypass Valve
The new Lee 375 Bypass Valve is designed to shunt flow across an actuator piston when the system pressure is either shut off or lost. The 375 Bypass Valve is normally open device, with a hydraulically-actuated pilot-to-close feature.
This miniature valve weighs only 16 grams and is designed for 4000psi systems. The metal components are constructed entirely of stainless steel for durability and long life. Each Lee Bypass Valve is 100% tested and inspected to ensure reliable, consistent performance.Further information
250 PRI Pressure Relief Valve
The new 250 PRI pressure relief valve is the latest addition to Lee’s line of miniature pressure relief valve inserts. This new valve is ideally suited for low flow hydraulic applications where a miniature, light weight pressure relief valve is needed. The 250 PRI is only 1.1 inches long and weighs only 4.5 grams. A Lee Safety Screen is incorporated at the inlet of the valve for protection.
Available in forward and reverse relief flow configurations, the 250 PRI is available in a wide range of standard cracking pressures from 80 to 3600 psid, and is constructed entirely of stainless steel for durability and long life. Each 250 PRI is 100% tested and inspected to ensure reliable, consistent performance.Further information
500 High Pressure Flosert
The new Lee High Pressure 500 Flosert is pressure compensated to provide a constant flow over a wide range of pressure differentials. This new valve is ideal for high pressure hydraulic applications with system pressures up to 5000 psi. Nominal weight is just 32 grams. Available in forward and reverse regulated flow configurations, the High Pressure 500 Flosert is constructed entirely of stainless steel for durability and long life. Regulated flow rates are available from 1.5 to 5.0 GPM. Each Flosert is 100% tested and inspected to ensure reliable, consistent performance.Further information
Hi-Q Pressure Relief Valve
The Hi-Q Pressure Relief Valve is designed for applications that require both a high relief pressure and a high flow rate in a compact package. This new relief valve is capable of relief pressures up to 5400 psid and 19 USGPM. The valve utilizes a side inlet flow path to help minimize the installation boss size and weight. The Hi-Q Pressure Relief Valve is offered in a range of cracking pressures from 1,000 to 5,400 psid and is designed for use with nominal system pressures up to 5,000 psi and peak pressures up to 6,750 psi.Further information
NACE Compliant 15,000psi Check Valves
The new range of Lee check valves has been specifically designed for the harsh duty applications found in the Oil Tool Industry such as chemical injection. They are constructed entirely of corrosion-resistant materials that are compliant with NACE specification MR0175/ISO 15156. These check valves feature a durable MP35N poppet and seat and they have been designed for checked direction pressures up to 15,000 psid. The NACE Compliant High Pressure Check Valves are available in free flow forward and free flow reverse directions, with cracking pressures of 5±3 and 1±0.5 PSID in sizes from 0.125" to 0.500" in diameter.Further information
Quiet Operation 3 Way Solenoid Valve
The Lee Company’s new Quiet Operation High Density Interface (HDI) is a 3-way solenoid valve designed to achieve patient comfort by reducing actuation noise by 50%. A typical solenoid valve has an inherent clicking sound when energized, which is caused by the metal-to-metal contact of the moving armature and stationary core. This new quiet operation design uses “whisper” technology to provide a sound level measurement of less than 37 dBA when measured at a distance of 24 inches and a valve cycle frequency of 10 Hz. Available in face mount, plug-in and ported configurations, the Quiet Operation HDI is ideal for medical applications flowing gas or air, such as dialysis machines, patient monitors, ventilators/respirators and other bedside medical devices.Further information
Lo Lohm HDI Solenoid Valve
The Lee Company’s High Density Interface (HDI) solenoid valve has been improved by offering more flow capacity without sacrificing size and weight. The Lo Lohm HDI solenoid valve provides the features of a large valve coupled with the superior performance of a miniature valve in one compact design. A spike and hold voltage drive is used to achieve an extended flow and pressure range. Performance parameters can be optimized for a specific application.Further information
Manual Override Solenoid Valve
A new solenoid valve has been developed which has a manual override capability for typical applications in engine cowl door systems and cargo door actuators on commercial aircraft and in rotor blade fold units on military helicopters. Currently available in a single coil normally closed configuration for 4,000psig systems, the valve can be designed with single or dual coils in normally closed or normally open configurations for operation in 3,000 or 5,000 psi systems .
Atomizing Nozzles Offer Precise Spray Pattern
The new atomizing nozzles, available in both airless and air-assisted styles, generate a 50-degree hollow cone spray pattern and offer precise, controlled atomization in a compact package. The airless atomizing nozzles do not require an external air supply and will atomize with pressures as low as 20 psi (on water).
Available in multiple flow ranges, the nozzles can be installed directly onto a proprietary VHS micro-dispense solenoid valve for precise flow control using pulse-width modulation (PWM).
The air-assisted nozzles utilize an external air source to control the atomization, allowing lower operating pressures (5 psi). The pressure of the liquid and air can be independently controlled to fine-tune the flow rate and nozzle performance.
Atomizing nozzles with special mounting configurations and PEEK wetted materials are available upon request.Further information
CB Solenoid Valve
The new Lee CB Solenoid Valve is economically designed, utilizing a cartridge bobbin coil coupled with our unique MultiSeal™ technology. The MultiSeal radically simplifies port layout by allowing total porting flexibility 360° around the seal, without the need for O-Rings or anti-Extrusion Rings. Weighing just 0.16 pounds, the CB Solenoid valve is a 3 way, normally closed design that is offered in both single coil and dual coil configurations with the lead wires exiting at either end of the valve and it will flow 0.31 USGPM at 3000psid .
NACE Compliant Floserts
The Lee Company introduces a new line of Lee Flosert® flow regulating valves, specifically designed for the harsh duty applications found in the oil tool industry. They are constructed entirely of corrosion-resistant materials that are compliant with NACE specification MR0175/ISO 15156. The Lee NACE Compliant Flosert provides a constant flow rate over a wide range of differential pressures up to 8,000 psid. Lee NACE Compliant Floserts are available in regulated flow forward and regulated flow reverse directions, with regulated flow rates available from .01 to 5 GPM. Sizes range from .250" to .500" in diameter. Each Lee Flosert is 100% tested and inspected to ensure reliable, consistent performance, eliminating the need for additional in-house testing.Further information
MP35N Hi-Bar Flange Mount Safety Screens
The Lee Company now offers a complete line of flange mount, HI-BAR® Safety Screens made entirely of MP35N, a nickelcobalt based alloy. Compliant with NACE MR0175/ISO 15156, these screens are specifically designed to offer exceptional corrosion resistance and extreme strength for harsh duty applications found in the oil and gas industries. Their robust, single piece construction enables these screens to withstand pressure differentials up to 7500 psi without rupture. The excellent resistance to crevice corrosion and stress corrosion cracking of these MP35N safety screens make them not only ideal for the oil and gas industries, but also for use in other hostile environments found in marine, medical, chemical and food processing applications. The MP35N HI-BAR Safety Screens are available in 6 different flange sizes and 8 different hole sizes, ranging from 0.002" to 0.020" in diameter. All Lee Safety Screens are precision cleaned and packaged before shipment.
Catch-All Safety Screens
The Lee Company's Catch-All Safety Screens integrate fine filtration into a rugged, compact, flange mount design. With a nominal hole size rating of 20 microns, these safety screens provide protection for critical components with even the smallest of flow passageways and clearances. The Lee Catch-All Safety Screens are incredibly robust considering their fine filtration rating. These screens incorporate a rugged, calendered, and sintered 316L stainless steel wire mesh weave for maximum strength and feature a seamless, one-piece design containing radial convolutions that greatly increase the contamination carrying capacity of the screen. The result is a high strength screen with an optimum amount of protection, in a small package. Eight Catch-All Safety Screen designs are available, ranging in size from 0.130" to 0.656" in diameter. All Lee Safety Screens are precision cleaned and packaged before shipment.Further information
High Pressure Micro Solenoid Valve for Completion Tools in Oil Wells
The Lee Company has developed a Reduced Diameter Solenoid Valve which has a maximum outside diameter of 0.550” (14mm) which is the same as an AA battery. In order to maintain the same power delivered by the coil, the length of the coil has been increased to 68mm. The solenoid valve is a single coil, 3 way, Normally Closed device, capable of operating up to 5,000psid at a maximum voltage of 32vdc and typically flowing 0.12USGPM at 200psid but could easily be designed as a Normally Open version. Typically these would be fitted into the annulus of a completion tool in an oil well where there is limited space available.
375 PRI/Chek Valve
The Lee Company’s new 375 PRI/Chek Valve combines the function of a pressure relief valve in parallel with a check valve into one easy to install insert. The relief valve function features a rugged Tungsten Carbide ball and a 440C seat for durability and long life. The remaining components are constructed entirely of stainless steel. The 375 PRI/Chek Valve is available in a range of relief flow cracking pressures for system pressures up to 5000 psi. Maximum restriction in the free flow direction is only 220 Lohms. Each Lee PRI/Chek Valve is 100% tested and inspected in both flow directions to ensure reliable, consistent performance.Further information
LPL2 Inert Solenoid Pump
The Lee Company’s new LPL2 Inert Solenoid Pump is the latest addition to the line of fixed volume pumps. The pump features a revolutionary port head design that allows tubing connections and manifold mounting. This enables the designer to test the fluidic system using connections to soft 1/16" tubing, and then once the system design has been finalized, the same pump can be manifold mounted using standard O-rings.
The electrical interface of the LPL2 Inert Solenoid Pump has also been updated for greater design flexibility. The contoured end cap provides secondary connector retention and is compatible with standard AMP connectors. The pump features a low power consumption of 2.5W in 12 or 24vdc models and dispenses a fixed volume of 50 microlitres per shot.Further information